Dell OptiPlex GX260 GX270 PS-5161-1D1 Power Supply 160W 3Y147 03Y147 CN-03Y147 PSU

Regular price ¥0.00 Sale

Product SKU: 3Y147


Item Dell OptiPlex GX260 GX270 PS-5161-1D1 Power Supply 160W 3Y147 03Y147 CN-03Y147 PSU
Part Number 3Y147 03Y147 CN-03Y147
Alternative Parts P2721
Model Number PS-5161-1D1
Compatible Model No. PS-5161-7DS2
Max Power 160W
Application For Dell OptiPlex GX50, GX60, GX240, GX260, GX270, GX280. For Dell Dimension 2400C, 4500C, 4600C, 4700C.
Connectors P1 - 20 Pin ATX Main Power Connector Cable P2 - 4 Pin ATX +12V Power Connector Cable P3 - 4 Pin Molex Connector Cable P4/P5 - Floppy/CD Connector Cable P6 - 5 Pin (6 Pin) Dell Sata Connector Cable
Condition Original, Tested, Working

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage, which for U.S. users means 115 (look for the little red switch on the back: If it's showing 230, slide it to 115). Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.


Your cart