824KH 0824KH Power Supply for Dell Dimension NPS-200PB-123 2100 4100, Dell Optiplex GX100 GX300 200W

824KH 0824KH Power Supply for Dell Dimension NPS-200PB-123 2100 4100, Dell Optiplex GX100 GX300 200W

Regular price ¥0.00 Sale

Product SKU: 824KH


Specifiction

Item Dell Dimension 2100 4100 Dell Optiplex GX100 GX300 200W Power Supply 0824KH NPS-200PB-123
Part Number 824KH,0824KH,CN-0824KH
Model Number NPS-200PB-123
Max Power 200Watt
Input 100-120V ~ 200-240V
Application Dell Precision Workstation 210, 220, 400 Dell Dimension 2100, 4100 Dell OptiPlex E1, G1, GX1, GXA-EM, GX100, GX110, GX115, GX200, GX300, K2 Small Mini-Tower Systems (SMT)
Detail Description Have Original Tested Working 200W Power Supply 0824KH NPS-200PB-123 In Good Condition.Fitting For Dell Dimension 2100 4100 Dell Optiplex GX100 GX300 .
Connectors 1x 20-Pin ATX Connector 5x 4-Pin Molex Connectors 1x 4-Pin Floppy Connector 1x Auxiliary Power Connector
Condition Refurbished, Tested, Working
HOW TO REPLACE YOUR PC POWER SUPPLY

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage, which for U.S. users means 115 (look for the little red switch on the back: If it's showing 230, slide it to 115). Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.

Loading...

Your cart